SHIVcare manufactures High-Pressure High-Vacuum (HPHV) Steam Sterilizers in SS 316L with zero-joint hydraulically formed chambers, PLC touch-screen automation, and full IS 3829 (Part 1 & 2) compliance — for CSSD departments, operation theatres, and government procurement via GEM.
Every design decision in a SHIVcare sterilizer is driven by one principle — zero failures in a clinical environment.
Hydraulically formed SS 316L end rings eliminate all weld-seam stress points — the most common failure mode under repeated high-pressure cycling.
Siemens/Allen-Bradley PLC with 7″ colour HMI, pre-validated cycle programmes, and USB audit-trail export for NABH documentation compliance.
Pre-vacuum SFPP cycles achieve residual air below 1 mBar — ensuring complete steam penetration into porous loads, wrapped sets, and rubber goods.
IS 3829 Part 1 & 2, ISO 13485:2016, CE Marking, and BIS registration — covering every procurement requirement from government tenders to private NABH audits.
From compact 100-litre nursing home units to 1,000-litre rectangular CSSD systems — every model carries full IS 3829 certification.
The flagship model. SS 316L zero-joint construction with multi-stage pre-vacuum. Operating pressure 1.2–2.2 kg/cm². Available in 100L to 600L chamber volumes.
Designed for high-throughput CSSD departments. Rectangular chamber maximises tray loading. Single-door and double-door pass-through configurations. 300L to 1,000L range.
Turnkey CSSD setup including sterilizers, washer-disinfectors, ultrasonic cleaners, drying cabinets, and sterile storage. Designed to NABH CSSD chapter specifications.
Critical parameters for hospital biomedical engineers and GEM procurement committees. Full specifications available on each product page.
| Parameter | Specification | Compliance Standard |
|---|---|---|
| Chamber Material | AISI 316L (Low Carbon) Stainless Steel | IS 3829 P1 |
| Operating Pressure Range | 1.2 kg/cm² (min) — 2.2 kg/cm² (max) | IS 3829 P2 |
| Sterilization Temperature | 121°C (gravity cycle) | 134°C (high-vacuum cycle) | IS 3829 P2 |
| Chamber End Ring Design | Hydraulically formed — zero weld joints on pressure boundary | Proprietary |
| Vacuum System | Multi-stage pre-vacuum (SFPP) | Residual air <1 mBar | EN 285 |
| Control System | PLC (Siemens/Allen-Bradley) + 7″ colour touch HMI | NABH Compliant |
| Temperature Uniformity | ±0.5°C across chamber during holding phase | IS 3829 P2 |
| Chamber Volumes Available | 100L · 200L · 300L · 450L · 600L · 800L · 1000L | Custom Available |
| Certifications | IS 3829 (Part 1 & 2) | ISO 13485:2016 | CE Marking | BIS | All Current |
| Procurement Channel | Direct | Dealer Network | GEM Portal | Export | GEM Registered |
Every SHIVcare sterilizer is backed by an Annual Maintenance Contract (AMC) with guaranteed 48-hour on-site engineer response anywhere in India. Our factory-trained service team carries critical spare parts inventory — ensuring your CSSD never becomes a bottleneck for your operation theatre schedule.
Dedicated service engineers across Gujarat, Maharashtra, Rajasthan, Delhi NCR, Tamil Nadu, and Karnataka.
Complete Installation, Operational and Performance Qualification documentation — required for NABH certification and CDSCO inspection.
Factory-genuine spare parts dispatched within 24 hours anywhere in India. No third-party substitutes that void certification compliance.
PLC data logging enables remote fault diagnosis before engineer dispatch — reducing average downtime significantly.
"After deploying SHIVcare HPHV autoclaves in our CSSD, we recorded zero sterilization failures over 18 months. The PLC audit trail made our NABH certification inspection completely seamless."
"SHIVcare's GEM registration and complete tender documentation support made procurement straightforward. Their IS 3829 certificates were accepted immediately by our purchase committee."
SHIVcare is a verified GEM seller. Government hospitals, ESIC facilities, and defence medical establishments can procure IS 3829-certified HPHV sterilizers directly through the GeM portal.
Fully registered and verified on GeM portal with complete MSME and GST documentation for government procurement.
Our team provides complete Technical Bid documentation, IS 3829 certificates, and factory inspection reports for hospital tenders.
Full GST invoicing under HSN 8419. 12% GST applicable. MSME certification available for government procurement preference.
100% designed and manufactured in India. Eligible for domestic preference in government procurement bids.
Answers to the most common questions from hospital biomedical engineers and purchase committees.